Monday, 3 August 2015

In //

What Makes the Fiberglass Insulation Perform Better?

In the mid-1990s, when the building science and home efficiency really took-off, people started looking for a long lasting solution to improve their building’s energy expenditure. And, they find fiberglass performing pretty well according to the standards. Easy installation, low cost, top-notch quality and adaptability nature to meet any standard makes it a popular choice among the home owners worldwide. Apart from these, there are certain things needed to be taken care of to obtain optimum performance.

What makes the fiberglass insulation perform better?

Installing an effective fiberglass insulation such as Owens Corning Paper Faced insulation must involve these three things:

  • The building should have a strong and an uninterrupted air barrier like taped sheathing.
  • The mechanical penetrations and gaps should be fully and properly airtight using the durable sealant or tape.
  • The batts should be installed with minimum compression and proper care.
When you take care of these three things, the fiberglass insulation performs better when compared to the other insulation types. Detailing the penetrations wisely and creating an effective air barrier is quite essential to obtain the optimum performance from the fiberglass batts. To minimize the exposure to the dust particles, you should keep the fiberglass in its original packing until you are ready for the installation.

What is an air barrier?

It could be really helpful to compare your home’s air barrier with the air-filled balloon. It is the skin of the balloon that act as a barrier and separates the outside air from the inside air. To hold air, the skin of the balloon must be strong and continuous enough to withstand the air pressure inside the balloon effectively so the building. Recent studies have shown that most of the home’s air barrier are not perfectly airtight, even if the well designed buildings have some air leakage. So, you must set the goal to make the air barrier completely free of leaks as possible.

Safety measures you need to take while installing:
  • You should wear long pants, long-sleeved shirt, goggles, sturdy shoes, gloves and a hat when installing the fiberglass insulation.
  • If glass fibers get on your skin, remove them immediately by using adhesive tape.
  • Do not rub your eyes, if the fiberglass gets into it. Use eyewash solutions or water to flush it out.
  • Wash your hands perfectly after finishing the job.
Just follow the concepts that are mentioned above, you could make your insulation perform better, and keep it in service for a longer period of time. Make sure that you buy products from an authentic store, so that you get the true value of your money.

0 comments:

Post a Comment